Features
- LF enhancer -3dB @ 38Hz to +7dB @ 63Hz Variable
- Balanced line inputs (XLR & 6.35mm jack) and XLR link sockets
- Speaker outputs on speakon sockets
- Twin ten segment LED VU power output meters
- Front panel LED illumination backlight with on / off switch
- Active clip limiter (internally configurable off to max)
- Fan cooled with proportional speed fan (twin fans for the MA2000)
- Class AB Mosfet output stage
- D.C, thermal and short circuit protection
- Mains inrush current limiter and soft start
Specifications
- Power Output (RMS) @ 1kHz
MA1000 - 500 + 500 watts RMS into 4 ohms
MA1300 - 650 + 650 watts RMS into 4 ohms
MA2000 - 1000 + 1000 watts RMS into 4 ohms
70% into 8 ohms
- Frequency response: 20Hz – 25kHz +/-0.5dB
- LF Enhancer: -3dB @ 38Hz to +7dB @ 63Hz Variable
- Input sensitivity: 775mV / 0dBu
- Input impedance: 10k + 10k (Balanced)
- Channel Seperation: Better than 80dB
- Signal to noise ratio: Better than 100dB
- T.H.D. @ 1kHz rated power – <0.02%
- Clip Limiter: Internal limiting (variable from off to max required SPL)
- Thermal protection: 90 degrees C
- D/C Protection: +/-32V
- Short circuit protection and soft start on all models
- Mains Input Power: 230V +/-10% 50-60Hz
- Mains inrush limiting
- Damping Factor: Better than 400
- Slew Rate: 40V / uS
Options, Dimensions & Weights
- MA1000 - 500 + 500 Watts RMS into 4 ohms
- Width: 483MM
- Depth: 290MM
- Height: 89MM
- Weight: 13.7KG
- MA1300 - 650 + 650 Watts RMS into 4 ohms
- Width: 483MM
- Depth: 290MM
- Height: 89MM
- Weight: 14.5KG
- MA2000 - 1000 + 1000 Watts RMS into 4 ohms
- Width: 483MM
- Depth: 420MM
- Height: 89MM
- Weight: 24KG
See Amplifier Accessories for rack sleeves and 100v line transformers, if required.
MA1000 & MA1300
MA2000
© McGregor Amplification
Website By NathanPH
